Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

		Operations on Band and Circular Sawing Machines - Course: Mechanical woodworking techniques. Trainees' handbook of lessons (Institut für Berufliche Entwicklung, 19 p.)
			(introduction...)
			1. Purpose of Circular Sawing Operations
			2. Assembly of a Table Circular Sawing Machine
			3. Tools
			4. Mode of Operation of a Circular Sawing Machine
			5. Circular Sawing Technology
			6. Purpose of Band Sawing Operations
			7. Assembly of a Band Sawing Machine
			8. Tools
			9. Mode of operation of a band sawing machine
			10. Band Sawing Technology

6. Purpose of Band Sawing Operations

Band sawing machines are used for sawing straight-line oblong, cross and angle cuts, equally for curved cuts (curves) of solid wood and sheet material.

Figure 15 Band sawing machine operations 1 curved cut, 2 cross-cut, 3 oblong cut

Which main difference is there between using a band sawing machine and a circular sawing machine?
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________