Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

CLOSE THIS BOOKOperations on Band and Circular Sawing Machines - Course: Mechanical woodworking techniques. Trainees' handbook of lessons (Institut für Berufliche Entwicklung, 19 p.)
VIEW THE DOCUMENT(introduction...)
VIEW THE DOCUMENT1. Purpose of Circular Sawing Operations
VIEW THE DOCUMENT2. Assembly of a Table Circular Sawing Machine
VIEW THE DOCUMENT3. Tools
VIEW THE DOCUMENT4. Mode of Operation of a Circular Sawing Machine
5. Circular Sawing Technology
VIEW THE DOCUMENT6. Purpose of Band Sawing Operations
VIEW THE DOCUMENT7. Assembly of a Band Sawing Machine
VIEW THE DOCUMENT8. Tools
VIEW THE DOCUMENT9. Mode of operation of a band sawing machine
10. Band Sawing Technology

1. Purpose of Circular Sawing Operations

Circular sawing machines are used for sawing straight-line oblong, cross and angular cuts in solid wood and sheet material.


Figure 1 Circular saw machine operations 1 oblong cut, 2 cross-cut, 3 angle cut

Solid woods are seamed and sheet material cut down to width through oblong cuts. Solid woods and sheet material are cut to length through cross and angular cuts.

Which cut varieties are possible on circular sawing machines?
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________

Different types of circular sawing machines are used in wood workshops, for example:

- table circular sawing machine:

is used for straight-line oblong, cross and angular cuts as the most common circular sawing machine


- double-format circular sawing machine:

is used for straight-line and parallel form cuts, particularly of sheet material, is in furniture construction


- hand circular saw:

used for oblong and cross cuts of solid wood and sheet material on building sites and during assembly word.

TO PREVIOUS SECTION OF BOOK TO NEXT SECTION OF BOOK

CD3WD Project Donate