Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

Home - English - French - German - Italian - Portuguese - Spanish
                              Bamboo Construction
Bamboo is one of the oldest materials people have used to increase their comfort
and well-being. In today's world of plastics and steel, besides continuing to make
its traditional contributions, bamboo is growing in importance. Outstanding
varieties of bamboo from throughout
the world are being tested to
find out how they can contribute
to local economies.
As the best species are identified
and disseminated, their use will
help to improve the lives of many.
With a few plants of superior
bamboos in the backyard, a family
will have at hand the wherewithal
to fence the garden, build a pigpen
or chicken coop, or add a room to
the house. The family will also be
able to increase its daily income by
making baskets or other specialties
for sale or exchange.
Bamboos are prominent elements in
the natural vegetation of many
parts of the tropical, subtropical
and mild temperate regions of the
world, from sea level to altitudes
or more than 13,000 feet (4000m).
People have widened the distribution
of many species of bamboo,
but some of the more valuable
species have not been distributed
as much as they could be.
Bamboo can be prepared for use in construction with simple tools. Once prepared,
bamboo can be used extensively in the construction of houses: <see figure 1> in making foundations,

fg1x319.gif (600x600)

frames, floors, walls, partitions, ceilings, doors, windows, roofs, pipes, and
troughs. For further detail, see Bamboo as a Building Material, by F. A. McClure.
The entries that follow explain:
    o     Splitting and preserving bamboo
    o     Bamboo joints
    o     Making bamboo board
    o     Bamboo walls, partitions, and ceilings
Splitting Bamboo
To prepare bamboo for use in construction, the culms (stems) must be carefully
                              Tools and Materials
Iron or hardwood bars, 2.5cm (1") thick
Steel wedges
Wooden posts
Splitting knives (Figure 4)

fg4x321.gif (100x600)

Several devices can be used for splitting culms. When bamboo is split the edges of
the bamboo strips can be razor-sharp; they should be handled carefully.
Splitting Small Culms
Small culms can be split to make withes (strips) for weaving and lashing:
o    Use a splitting knife with a short handle and broad blade to make four cuts,
     at equal distances from each other, in the upper end of the culm (Figure 2).

fg2x320.gif (200x600)

o    Split the culm the rest of the way by driving a hardwood cross along the
     cuts (Figure 3).

fg3x320.gif (437x437)

o    Using a long-handled knife (see Figure 4), cut each strip in half (see Figure 5).

fg4x321.gif (200x600)

fg5x321.gif (200x600)

     A strip of bamboo can be held on the blade to make it thicker and speed
     up the work.
o    Use the same knife to split the soft, pithy inner strip from the hard outer
     strip (see Figure 6). The inner strip is usually discarded.

fg6x321.gif (437x437)

Splitting Heavy Culms
o    Build a cross of iron or
     hardwood bars about 2.5cm
     (1") thick, and place it on
     firmly set posts about 10cm
     (4") thick and 90cm (3") high
     (see Figure 7).

fg7x321.gif (437x437)

o    At the top end of the culm,
     use an ax to make two pairs
     of breaches at right angles to
     each other (see Figure 7).
o    Hold the breaches open with
     steel wedges placed a short
     distance from the end of the
     culm, until the culm is on the
     cross as shown in Figure 7.
o    Push and pull the culm until
     the cross splits the whole
o    To split the culms again after they are split into four strips, use a simple
     steel wedge mounted on a post or block of wood (see Figure 8).

fg8x322.gif (393x393)

o    Paired wedges solidly mounted on a block or heavy bench can be used to
     split strips into three narrower strips (see Figure 9).

fg9x322.gif (393x393)

Bamboo Preservation
Most bamboos are subject to attack by rot fungi and wood-eating insects.
Bamboos with higher moisture and starch content seem to be more prone to
attack, and insect pests may be more of a problem in some seasons than others.
So bamboo should be cut if possible in the bugs' "off-season." There are many
methods for making bamboo more resistant to attack. A simple method that
combines proper curing and the use of a pesticide (insecticide and/or fungicide) is
described here.
If bamboo is to be used to hold food or water, the only treatment recommended
is immersion of green bamboo in a borax-boric acid solution (see Bamboo Piping).
                              Tools and Materials
Machete and hacksaw for felling and trimming bamboo culms
Pesticide-choice depends on the insect or fungus pests that are prevalent in your
area. Consult your local extension agent or farmers in the neighborhood about the
type and its use. Follow directions carefully.
Talc-to mix with dry pesticide according to package instructions. If talc is not
available, other dry dusty materials such as finely powdered dried clay is used.
Dusting bag (made from cloth with an open weave)
Bamboo should not be cut before it is mature. This is usually the end of the third
season. Freshly-cut bamboo culms should be dried for 4 to 8 weeks before being
used in building.
A clump-curing process tested by the U.S. Department of Agriculture Federal
Experiment Station in Puerto Rico helps to reduce attack by insects and rot
fungi. The steps are:
o    Cut the bamboo off at the base, but keep it upright in the clump.
o    Dust the fresh-cut lower end of the culm at once by patting it with a
     dusting bag filled with the pesticide-talc mixture. An alternative method of
     dusting is to dip the ends of the culms into a tray containing the mixture.
o    To keep the bamboo from being stained or rotted by fungi, raise each culm
     off the ground by putting a block of stone, brick, or wood under it.
o    Leave the culms in this position for 4 to 8 weeks, depending on whether the
     weather is dry or damp.
The culms should be as dry as possible before being placed near buildings, where
wood eating insects usually are.
o    When the culms have dried as much as conditions will permit, take them
     down and trim them. Dust all cut surfaces immediately with the pesticide-talc
o    Finish the seasoning in a well-aired shelter where the culms are not exposed
     to rain and dew. Rain will stain the culms when they become dry.
     This method will prevent damage by wood-eating insects while the culms are
If the bamboo is to be stored for a long time, stacks and storage shelves should
be sprayed every six months with the appropriate pesticide mixed in water or
light oil. Local conditions may shorten or lengthen the time between sprayings.
In both storage and use, bamboo culms are best preserved when they are protected
against rain in a well-ventilated place where they do not touch the ground.
A number of methods of joining bamboo for making implements or for construction
are shown in Figures 10 and 11.

fg103240.gif (600x600)

                              Tools and Materials
Lashing material: cord or wire
Machete, hacksaw, knife, drill, and other bamboo working tools
Bamboo is useful for heavy construction because it is strong for its weight. This
is because it is hollow with the strongest fibers on the outside where they give
the greatest strength and produce a hard attractive surface. Bamboo has solid
diaphragms across each joint or node, which prevent buckling and allow the
bamboo to bend considerably before breaking.
Any cut in the bamboo, such as a notch or mortise, weakens it; therefore, mortise
and tenon joints should not be used with bamboo. However, notches or saddle-like
cuts can be made at the upper ends of posts which hold cross pieces (see Figure 10, C an D).

fg10x324.gif (600x600)

Bamboo parts are usually lashed together because nails will split most culms. The
withes (strips) for lashing are often split from bamboo and sometimes from rattan.
When all local bamboo yields brittle withes, lashing must be done with bark, vines
or galvanized iron wire.
In bending bamboo--for example, for the "Double Butt Bent Joint" in Figure 11-you

fg11x325.gif (600x600)

can help to keep the bamboo from splitting by boiling or steaming it and bending
it while it is hot.
Local artisans often know the best species of bamboo and they have frequently
worked out practical methods for making joints.
Bamboo culms can be split and flattened to form boards for use in sheathing,
walls, or floors.
                              Tools and Materials
Ax--lightweight, with a wedge-shaped head
Spud--a long-handled shovel-like implement with a broad blade set at an angle to
work parallel to the surface of the board.
Large bamboo culms
Not all of the tools listed above are necessary, but they speed up the work when
a large quantity is being produced.
o   Remove the thick-walled lower part of the culm.
o   Use an ax with a well-greased blade to split each node of the culm in
    several places (see Figure 12). This should be done carefully to avoid

fg12x327.gif (600x600)

    injuring one's feet.
o   Spread the culm wide open with one long split.
o   Remove the pith at the joints with a machete, adz, or spud (see Figure 13).

fg13x327.gif (600x600)

o   Store the boards as shown in Figure 14.

fg14x327.gif (600x600)

Bamboo buildings can be built to meet a variety of requirements for strength,
light, ventilation, and protection against wind and rain. A few of the methods of
building with bamboo are described here.
The parts of a building that are not usually made from bamboo are the foundation
and the frame.
Both split and unsplit bamboo culms are used in building. They can be used either
horizontally or vertically. Culms exposed to the weather, however, will last longer
if they are vertical because they will dry better after rain.
                              Tools and Materials
Local bamboos
Bamboo-working tools, such as machete, hacksaw, chisel, drill
Lashing material: wire or cord
Barbed wire
Plaster or stucco
A method commonly used in Ecuador for making walls is to lash wide bamboo
strips or thin bamboo culms, horizontally and at close intervals, to both sides of
hardwood or bamboo uprights. The spaces between the strips or culms are filled
with mud alone or with mud and stones.
In Peru, flexible bamboo strips are woven together and then plastered on one or
both sides with mud.
An attractive but weaker wall can be built by using bamboo boards, stretched
laterally as they are attached, as a base for plaster or stucco. Barbed wire can be
nailed to the surface to provide a better bond for the stucco. The exterior can be
made very attractive by whitening it with lime or cement. <see figure 15>

fg15x329.gif (600x600)

Partitions are usually much lighter and weaker than walls. Often they are no more
than a matting woven from thin bamboo strips and held in place by a light
framework of bamboo poles. Bamboo matting is often used to finish ceilings and
both interior and exterior walls; bamboos with thin-walled, tough culms are
usually used for this.
Ceilings can be built with small, unsplit culms placed close together or with a
lattice of lath-like strips split from larger culms. There should be some space to
let smoke from kitchen fires escape.
McClure, F.A. Bamboo as a Building Material. Washington, D.C.: Foreign
Agricultural Service, U. S. Department of Agriculture, 1953; reprinted 1963 by
Office of International Housing, Department of Housing and Urban Development.
Sources of information of bamboo are:
Forestry Division
Joint Commission on Rural Reconstruction
37 Nan Hai Road
Taipei, Taiwan
Forest Research Institute
P.O. New Forest
Dehru Dun, India
Tropical Development & Research Institute
56-62 Grays Inn Road
London, WC 1
Federal Experiment Station in Puerto Rico
U.S. Department of Agriculture
Mayaguez, Puerto Rico