Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

		Operations on Smooth Miller and Thicknessing Miller - Course: Mechanical woodworking techniques. Trainees' handbook of lessons (Institut für Berufliche Entwicklung, 10 p.)
			(introduction...)
			1. Purpose of Milling at the Smooth Miller
			2. Construction of the Smooth Miller
			3. Setting of the Smooth Miller
			4. Milling of the Workpieces
			5. Purpose of Milling on the Thicknessing Miller
			6. Construction of the Thicknessing Miller
			7. Setting of the Thicknessing Miller
			8. Milling of the Workpieces
			9. Tasks

8. Milling of the Workpieces

After setting the milling thickness switch on the machine and slip in the workpieces by hand until they are taken by the feed roller. The feed device does the transport during the milling operation.

The rate of feed is adjustable and is between 5 - 25 m per minute. The lower the rate of feed is chosen the better the quality of the surface will be.