Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

		Operations on Smooth Miller and Thicknessing Miller - Course: Mechanical woodworking techniques. Trainees' handbook of lessons (Institut für Berufliche Entwicklung, 10 p.)
			(introduction...)
			1. Purpose of Milling at the Smooth Miller
			2. Construction of the Smooth Miller
			3. Setting of the Smooth Miller
			4. Milling of the Workpieces
			5. Purpose of Milling on the Thicknessing Miller
			6. Construction of the Thicknessing Miller
			7. Setting of the Thicknessing Miller
			8. Milling of the Workpieces
			9. Tasks

3. Setting of the Smooth Miller

Setting of the stop bar and the safety device for the necessary working width. Setting of the cutting depth at the feeding table. The cutting depth depends on the necessary chip removal. The chip removal depends, for instance, on the quality of the board and on the relation between rough size and end measure.