- Bolts and screws which have grown rusty should be
treated with a suitable rust solvent, to loosen them.
- Bolts and screws which cannot be loosened despite the use of a
rust solvent must be bored out. Bore when you have removed the head and the nut
with a chisel.
- Where component parts are to be taken apart, all screwed
joints should be loosened before the parts are fully dismantled.
- Use a suitable support for large parts which are to be
dismantled so that they cannot drop onto the ground. Put the support in place
before you unscrew the joints.
- Make sure that you remember the correct mounting position of
parts which were removed for repairs.
Mark the parts suitably for re-assembly.
Use the right size of tools for disassembly work.
Beware that bolt threads or nuts are not damaged or you slip and
cause injuries.
Give important details of dismantling component
parts.
______________________________
______________________________
______________________________
