 |  | Reaming - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut für Berufliche Entwicklung, 21 p.) | |
 |  | (introduction...) | |
| | 1. Purpose of reaming | |
| | 2. Design and types of reamers | |
| | 3. Preparation for reaming | |
| | 4. Reaming with solid reamer | |
| | 5. Reaming with floating reamer | |
| | 6. Reaming of taper holes | |
| | Table 1 - Recommended values for machining allowances | |
| | Table 2 - Usual kinds of fits | |
