 |  | Annealing, Hardening, Tempering - Course: Working techniques of heat treatment of steel. Trainees' handbook of lessons (Institut für Berufliche Entwicklung, 27 p.) |
 |  | (introduction...) |
| | Introductory Remarks |
| | Hints on Labour Safety |
| | 1. Objectives of Heat Treatment of Steel |
| | 2. Kinds of Heat Treatment Processes |
|  | 3. Devices and Auxiliary Means |
| | (introduction...) |
| | 3.1. As to Heating |
| | 3.2. As to Transport |
| | 3.3. As to Cooling |
| | 4. Annealing |
| | (introduction...) |
| | 4.1. Principle and Kinds of Annealing Processes |
| | 4.2. Working recommendations |
| | 4.3. Control of the Annealing Result |
| | 5. Hardening |
| | (introduction...) |
| | 5.1. Material-related Preconditions for the Hardening by Means of Heat Treatment |
| | 5.2. Principle of Hardening by Means of Heat Treatment |
| | 5.3. Kinds of Hardening by Means of Heat Treatment |
| | 5.4. Hardness-related Shaping of the Workpieces |
| | 5.5. Hardening Defects |
| | 5.6. Specific Working Hints for Practical Execution of Work |
| | 5.7. Hardness Measurement |
| | 6. Tempering |
| | (introduction...) |
| | 6.1. Types of Tempering |
| | 7. Surface Hardening |
| | (introduction...) |
| | 7.1. Types of Surface Hardening |
| | 8. Hardening and Tempering |
