Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

		Clay Brick and Tile Moulding Equipment (GTZ, 1991, 18 p.)
			(introduction...)
			Acknowledgements
			Technology
			Moulding equipment
			Criteria for selection and purchase
			Checklist for potential buyers
			Clay Bulley
			Parry/ITW type e brick press
			Parry/ITW Clay Pantile production plant
			Ceratile
			CERATEC extrusion plant CERAMEX V1/CERACUT/CERAFEED DL/CERABELT
			TERSTARAM (manual) and semi-terstamatique (motorized)
			CERAMAN (manual) and CERAMATIC (motorized)
			Heuser Pug Mill/Extruder LSP 250 and STP 300
			Heuser vertical extrusion presses TS-1, LPG and TS-400
			Bibliography

A Publication of the Deutsches Zentrum für Entwicklungstechnologien - GATE , a Division of the Deutsche Gesellschaft für Technische Zusammenarbeit (GTZ) GmbH - 1991

NOTE 1: The technical details were provided by the producers. GATE is not in a position to verify these data and therefore cannot accept responsability for any inaccuracies. In cases where prices have been quoted, these are subject to change and are thus meant to serve only as guidelines valid for 1991.

NOTE 2: from the cd-rom library editors: if you perform a search on “Clay” and “tiles” in other sections or documents in this cd-rom, you will find articles, books or information that may usefully complement or update the information contained herein.