|
One 6-foot battleaxe |
|
Shaft |
- 6-foot piece of 6-inch pole |
|
Tower |
- Four 20 foot 9 to 10 inch poles |
|
|
Eight 10 foot 2 to 3 inch poles for diagonals |
|
|
Ten 8 foot 2 to 3 inch poles for bracing |
|
|
Spikes or bolts or rope |
|
Arms |
- Four 3 foot poles |
|
Blades |
- Enough material to cover four 2x2 squares |
|
Wire |
- 30 feet baling type wire |
|
Bearings and fasteners |
|
Crank arm, crank pin and fasteners |
|
Con rod and bolts or pins |
|
One 4½ by 6-foot jumbo |
|
Shaft |
- One 6 foot 4 inch pole |
|
Arms |
- Eight 6 foot 2 inch poles |
|
Fans |
- Enough material to cover four - 1 foot by 4½ foot fans (8
pieces of 6 foot 1 by 6) |
|
Box |
- Four 3 foot corner posts - enough planking to cover two 3 foot
by 4¼ foot sides and two 3 foot by 6 foot sides |
|
Tower |
- Same as above |
|
Bearings and fasteners |
|
Crank arm, crank pin and fasteners |
|
Con rod and bolts or pins |
|
One 6 foot sailmill |
|
Shaft |
- 8 foot piece of 6 inch pole |
|
Tower |
- Four 16 foot 9 to 10 inch poles |
|
|
Four 10 foot 2 to 3 inch poles for diagonals |
|
|
Ten 8 foot 2 to 3 inch poles for bracing and steps |
|
|
Spikes or bolts or rope or rebar |
|
Arms |
- Three 6 foot poles (2-3") |
|
Sails |
- Enough material to make six 2½ x 2½ foot triangles
|
|
Wire |
- 150 feet baling type wire |
|
Bearings and fasteners |
|
Crank arm, crank pin and fasteners |
|
Con rod and bolts or pins |
|
Twelve or more nails or hooks to hold sails on with |
